Shortbus
Professional Cocksucker
I was wondering if any1 knows what i can do to improve my shitty fps. This is what i have currently (which i got off a site a while back). Its more or less good but at times my fps drops to 10-20 in certain areas on certain maps.
__________________________________________
budget_show_history 0
cl_cmdbackup 2
cl_cmdrate 101
cl_interp 0.01
cl_interpolate 1
cl_lagcomp_errorcheck 1
cl_lagcompensation 1
cl_updaterate 101
cl_smooth 1
rate 25000
// Casey's Config v2 (CAL compliant)
// Updated for new season by CAL|Stone
// Updated 01/23/07 - Added misc settings section
//_Set Netcode vars_
cl_cmdrate "101"
cl_interp "0.01"
cl_interpolate "1"
cl_lagcomp_errorcheck "0" // Disables lagcompensation error checking, only needed if you're having any registration/loss/choke problems.
cl_lagcompensation "1"
cl_smooth "1"
cl_updaterate "101"
rate "25000"
//_Set MP vars_
mp_decals "0" // How many player sprays will be shown.
//_Set Client vars_
cl_drawmonitors "0" // Disables the rendering of ingame "monitors" which contain 3d rendered images.
cl_ejectbrass "0" // Disables brass ejection
cl_forcepreload "1" // Forces the game to load all texture and model information into memory on map load.
cl_phys_props_enable "1" // Enables phsyics props.
cl_phys_props_max "50" // Maximum amount of physics props allowed.
cl_ragdoll_physics_enable "0" // Disables ragdoll.
cl_restrict_server_commands "0" // Compatible/needed with serverplugins
cl_show_splashes "0" // Disables water splashes.
//_Set Render vars_
r_3dsky "0" // Disables the rendering of 3d sky boxes.
r_decal_cullsize "9999" // Any decals under this size are not rendered.
r_decals "0" // Disables decals.
r_drawbatchdecals "1" // Enables the rendering of decals in batch.
r_drawdetailprops "1" // Enables the rendering of detail props.
r_drawflecks "0" // Disables the sparks and dirt from bullet impacts.
r_drawmodeldecals "0" // Models decals (i.e. blood).
r_eyes "0" // Disables eyes in models.
r_lod "-1" // Different level of details on models. -1 = Variable at distance. 0 = None. 1 = Minor. 2 = Less minor.
r_modellodscale "1.0" // The transitioning power of LOD.
r_occlusion "0" // Enables the Model Occlusion system.
r_propsmaxdist "100" // Max distance at which props are rendered.
r_renderoverlayfragment "0"
r_rootlod "2" // Base lod of the model in the memory.
r_shadowmaxrendered "32" // Max shadows the game will render.
r_shadowrendertotexture "1" // Rendered the shadow texture causing it to match the player model.
r_shadows "1" // Enables shadows (Change be disabled for additional performance.)
r_teeth "0" // Disables teeth in models.
r_waterdrawreflection "0" // Disables the rendering of water reflections.
r_waterforceexpensive "0" // Forces cheap water.
gl_clear "0" // Disables the gl_clear convariable.
props_break_max_pieces "0" // Disables prop fragmenting
//_Set Materials vars_
mat_antialias "0" // Disables the use of multisampling to smooth out edges.
mat_bumpmap "0" // Disables bump mapping.
mat_clipz "0" // Disables optimized Z-Buffer rendering.
mat_compressedtextures "1" // Disables texture compression. Users with low amounts of system memory should turn this on.
mat_disable_bloom "1" // Disables bloom effects.
mat_hdr_enabled "0" // Disables HDR.
mat_hdr_level "0" // Double Disables HDR.
mat_mipmaptextures "1" // Enables the use of mipmapping to make textures look smooth.
mat_picmip "2" // Changes the resolutions of textures when they're loaded into memory. May improve FPS on graphics cards with low memory sizes.
mat_reducefillrate "1" // Reduces the fillrate when the game is run in DXLevel 8.
mat_specular "0" // Disables Specularity on objects.
mat_trilinear "0" // Disables the use of Trilinear mipmapping.
mat_wateroverlaysize "8" // Sets the resolution of water distortion. Must be multiple of 8.
//_Set Violence vars_
violence_ablood "1"
violence_agibs "1"
violence_hblood "1"
violence_hgibs "1"
//_Set HUD vars_
hud_centerid "1" // Centers player IDs
net_graph "3" // Enables net_graph (Required in SS round)
net_graphpos "2" // Adjusts netgraph position-set between 1 and 3.
//_Set Misc settings_
cl_downloadfilter "nosounds" // Disables annoying pub sound downloads
fps_max "101" // Caps framerate. Set to max monitor refresh rate + 1.
clear
echo _Casey's Config v2 (CAL compliant) loaded_
__________________________________________
Secondly, what are the ideal rates to set cl_cmdrate, cl_updaterate to?
__________________________________________
budget_show_history 0
cl_cmdbackup 2
cl_cmdrate 101
cl_interp 0.01
cl_interpolate 1
cl_lagcomp_errorcheck 1
cl_lagcompensation 1
cl_updaterate 101
cl_smooth 1
rate 25000
// Casey's Config v2 (CAL compliant)
// Updated for new season by CAL|Stone
// Updated 01/23/07 - Added misc settings section
//_Set Netcode vars_
cl_cmdrate "101"
cl_interp "0.01"
cl_interpolate "1"
cl_lagcomp_errorcheck "0" // Disables lagcompensation error checking, only needed if you're having any registration/loss/choke problems.
cl_lagcompensation "1"
cl_smooth "1"
cl_updaterate "101"
rate "25000"
//_Set MP vars_
mp_decals "0" // How many player sprays will be shown.
//_Set Client vars_
cl_drawmonitors "0" // Disables the rendering of ingame "monitors" which contain 3d rendered images.
cl_ejectbrass "0" // Disables brass ejection
cl_forcepreload "1" // Forces the game to load all texture and model information into memory on map load.
cl_phys_props_enable "1" // Enables phsyics props.
cl_phys_props_max "50" // Maximum amount of physics props allowed.
cl_ragdoll_physics_enable "0" // Disables ragdoll.
cl_restrict_server_commands "0" // Compatible/needed with serverplugins
cl_show_splashes "0" // Disables water splashes.
//_Set Render vars_
r_3dsky "0" // Disables the rendering of 3d sky boxes.
r_decal_cullsize "9999" // Any decals under this size are not rendered.
r_decals "0" // Disables decals.
r_drawbatchdecals "1" // Enables the rendering of decals in batch.
r_drawdetailprops "1" // Enables the rendering of detail props.
r_drawflecks "0" // Disables the sparks and dirt from bullet impacts.
r_drawmodeldecals "0" // Models decals (i.e. blood).
r_eyes "0" // Disables eyes in models.
r_lod "-1" // Different level of details on models. -1 = Variable at distance. 0 = None. 1 = Minor. 2 = Less minor.
r_modellodscale "1.0" // The transitioning power of LOD.
r_occlusion "0" // Enables the Model Occlusion system.
r_propsmaxdist "100" // Max distance at which props are rendered.
r_renderoverlayfragment "0"
r_rootlod "2" // Base lod of the model in the memory.
r_shadowmaxrendered "32" // Max shadows the game will render.
r_shadowrendertotexture "1" // Rendered the shadow texture causing it to match the player model.
r_shadows "1" // Enables shadows (Change be disabled for additional performance.)
r_teeth "0" // Disables teeth in models.
r_waterdrawreflection "0" // Disables the rendering of water reflections.
r_waterforceexpensive "0" // Forces cheap water.
gl_clear "0" // Disables the gl_clear convariable.
props_break_max_pieces "0" // Disables prop fragmenting
//_Set Materials vars_
mat_antialias "0" // Disables the use of multisampling to smooth out edges.
mat_bumpmap "0" // Disables bump mapping.
mat_clipz "0" // Disables optimized Z-Buffer rendering.
mat_compressedtextures "1" // Disables texture compression. Users with low amounts of system memory should turn this on.
mat_disable_bloom "1" // Disables bloom effects.
mat_hdr_enabled "0" // Disables HDR.
mat_hdr_level "0" // Double Disables HDR.
mat_mipmaptextures "1" // Enables the use of mipmapping to make textures look smooth.
mat_picmip "2" // Changes the resolutions of textures when they're loaded into memory. May improve FPS on graphics cards with low memory sizes.
mat_reducefillrate "1" // Reduces the fillrate when the game is run in DXLevel 8.
mat_specular "0" // Disables Specularity on objects.
mat_trilinear "0" // Disables the use of Trilinear mipmapping.
mat_wateroverlaysize "8" // Sets the resolution of water distortion. Must be multiple of 8.
//_Set Violence vars_
violence_ablood "1"
violence_agibs "1"
violence_hblood "1"
violence_hgibs "1"
//_Set HUD vars_
hud_centerid "1" // Centers player IDs
net_graph "3" // Enables net_graph (Required in SS round)
net_graphpos "2" // Adjusts netgraph position-set between 1 and 3.
//_Set Misc settings_
cl_downloadfilter "nosounds" // Disables annoying pub sound downloads
fps_max "101" // Caps framerate. Set to max monitor refresh rate + 1.
clear
echo _Casey's Config v2 (CAL compliant) loaded_
__________________________________________
Secondly, what are the ideal rates to set cl_cmdrate, cl_updaterate to?
